A 25kW commercial solar system in Melbourne generates around 90 kWh a day on average, or roughly 33,000 kWh a year. It is well suited to small and medium businesses such as offices, retail shops, cafes, clinics, workshops and light industrial units that use most of their power during business hours.
Because commercial sites consume much of their solar while it is being generated, payback on a well designed 25kW system is often faster than on a home system. Silicon Solar designs each system from your actual usage, handles network approval and installs around your trading hours.
25kW Solar System at a Glance
| Specification | 25kW Solar System |
|---|---|
| Panels | Around 55 to 60 panels at 440W or larger |
| Inverter | Three phase commercial inverter, or a combination of inverters, sized to the array |
| Roof space needed | About 120 to 130 square metres of usable roof |
| Average daily output in Melbourne | About 90 kWh |
| Estimated yearly output | About 33,000 kWh |
| Best suited to | Offices, retail, hospitality, clinics, workshops, light industry |
| Warranties | 25 year panel performance, 10 year inverter (brand dependent) |
Output figures are estimates based on Melbourne’s average solar exposure of roughly 3.6 kWh per kW of panels per day. Actual generation depends on roof orientation, tilt, shading and season. Panel counts vary with the module wattage chosen.
Commercial Grade Solar Panels
Around 55 to 60 x 440W+ Solar Panels
- Tier 1 commercial grade solar modules
- 440W and larger high efficiency panels
- All panels on the Clean Energy Council approved list
- 25 year panel performance warranty
- Local Australian warranty support


Three Phase Commercial Inverters
Three Phase Inverter Sized to 25kW
- High efficiency three phase design
- Brands such as Fronius, Sungrow, GoodWe and Solis
- Remote online monitoring
- Export limiting where your network requires it
- 10 year warranty on most commercial models


Commercial Roof Mounting
Panel Mounting System
- Racking for tin, Klip-Lok, tile and flat commercial roofs
- Tilt frames to improve output on low pitch roofs
- Anodised aluminium, corrosion resistant
- Engineered for Australian wind loads
- Layouts that keep roof access and walkways clear

Commercial Solar Installation
Installation by Silicon Solar
- Solar Accreditation Australia (SAA) accredited, licensed electricians
- Work scheduled around your trading hours
- Network application and export approval handled for you
- Certificate of Electrical Safety (CES) provided
- Commissioning, monitoring setup and handover

Is a 25kW System Right for Your Business?
A 25kW system is a strong fit when your site has steady daytime demand of roughly 60 to 150 kWh per day. Typical examples include:
- Offices and professional practices running lighting, IT and air conditioning
- Retail stores and cafes with refrigeration and cooking equipment
- Medical and allied health clinics
- Workshops, small warehouses and light manufacturing
If your daytime use is higher, a 50kW system may deliver better returns.

How a 25kW System Cuts Business Energy Costs
Businesses pay some of the highest daytime electricity rates, and that is exactly when solar produces. Every kilowatt hour your site uses directly from the panels replaces power you would otherwise buy at your business tariff, while surplus earns a feed-in credit.
- Lower daytime consumption charges
- Reduced exposure to future electricity price rises
- Better results when operating hours match daylight hours
- A visible sustainability commitment for customers and staff
How We Deliver Your 25kW Solar System
- Energy review. We analyse 12 months of bills or interval data to see when your site uses power.
- Site inspection. We check roof structure, orientation, shading, switchboard capacity and supply.
- Design and proposal. You receive a system design with expected generation, savings and payback.
- Approvals. We manage the network connection application and any export limits your distributor sets.
- Installation and commissioning. Our team installs with minimal disruption, then commissions and tests the system.
- Monitoring and support. You get live monitoring and a local team for warranty and service.
STC Discount, Tax and Finance
Commercial systems up to 100kW are eligible for Small-scale Technology Certificates (STCs) under the federal Small-scale Renewable Energy Scheme. We apply the STC discount directly to your quote, which can make a meaningful difference to the upfront cost. Solar equipment may also be depreciable for tax purposes, so speak with your accountant about how it applies to your business.
Finance options are available, so you can start saving without a large upfront outlay and protect your cash flow.
Why Melbourne Businesses Choose Silicon Solar
Silicon Solar has been installing solar across Victoria since 2015. We are a CEC Approved Solar Retailer, a Solar Victoria Authorised Retailer and NETCC approved, with more than 4,000 customers served and a 4.9 star Google rating.
- Systems designed from your real load profile, not a generic package
- Only Clean Energy Council approved panels and inverters
- Accredited installers and one point of contact from proposal to handover
- Network approvals, STCs, CES and metering managed for you
- Finance options and local Victorian after sales support
Compare other sizes: 50kW commercial solar system and 100kW commercial solar system, or see all commercial solar systems.
Frequently Asked Questions
On average about 90 kWh per day, or roughly 33,000 kWh per year, depending on roof orientation, tilt and shading.
Around 55 to 60 panels using 440W or larger modules, needing about 120 to 130 square metres of usable roof.
Small to medium businesses with steady daytime use, such as offices, retail, hospitality, clinics and workshops.
Yes. Systems up to 100kW are eligible for Small-scale Technology Certificates, and we apply the discount directly to your quote.
Yes. Finance options are available so you can start saving without a large upfront payment.
Most commercial sites already have three phase supply, which suits a 25kW system. We confirm your supply and switchboard during the site inspection.